Before using the instrument for the first time the safety instructions have to be read. To reduce the risk of electric shocks,
burns, fire, or other injuries, the following safety instructions have to be observed:
The light alarm clock LiteClock is not allowed to be placed in water or near heated surfaces.
To prevent inadvertent contact with water, do not use the LiteClock while bathing and do not pick up the adapter
or cord if the hands are wet.
Contraindications
Warning: The magnetic field therapy is not allowed to use by patients:
with a pacemaker (ad hoc decision) • with an ICD (implantated cardiodefibrillator)
with cancer ( for cases in which the illness can be dated back for less than 5 years) • in the childbearing period
with bacterial, inflammable athropathy•
with massive, feverish infectious disease
In these cases please contact your physician .
Operation of Magneto Fit MF 300 und MF 400
Operation of Magneto Fit MF 300
ON/OFF: By pushing the button the unit can be switched on or off. After switching on the unit the ON/OFF-LED
begins to shine.
ERROR: This LED shines, if the mat is not or not correct connected with the control unit. The unit can not be used.
FREQUENCY: By pushing the „+" button the frequency can be increased up to 19 Hertz.
By pushing the „–" button the frequency can be decreased until 0 Hertz. If 0 Hertz is reached the control unit is
deactivated.
PULSE: Flash in the rhythm of the adjusted frequency.
ACTIVE: If the control unit is operating, the LEDs of the display will be powered one after another (Running light).
The speed of the running light is independent from the adjustment of the frequency.
INTERVAL: By pushing the button the LED will be activated. There is a change in the function of the unit. The
control unit will be switched on for 6 seconds and after that switched off for 3 seconds (Rest) After that the process
starts again. By pushing the button again the function can be deleted. Some scientists have the opinion, that the
body can assimilate the energy of the magnetic fields so optimal.
TIMER: If the frequency is adjusted higher than 4 hertz the timer switches on and the LED begins to shine. The Timer
will be on for 30 minutes. After this time the units switch off. The frequency will be adjusted to 0 Hertz.
Circuit points:
Wall power supply,
Magnetic field therapy mat
- 8 -