Publicité
Les langues disponibles
Les langues disponibles
While setting the time, the central sec-
onds hand S stops moving because the
watch has a stop seconds function.
Push the crown I back to position 2
and secure it by turning it upwards
(
).
L L
Changing the date (D):
Release the crown I by turning it
downwards (
), then pull it to posi-
M M
tion 3 to change the date.
Turn the crown clockwise (
advance the calendar until the required
date appears in the window D.
Push the crown I back to position 2
and secure it by turning it upwards
(
).
L L
Set the alarm time
(HA):
Release the crown II by turning it
downwards (
), then pull it to posi-
M M
tion 7 to set the alarm time.
Rotate the crown anti-clockwise (
until the hand (HA) reaches the
required time.
Changing the alarm time is always done
in by turning the hand backwards.
Push the crown II back to position 6
), to
and secure it by turning it upwards
L L
(
).
L L
Activating and de-activating the
alarm (SA)
Push button III is used to activate and
deactivate the alarm function.
To activate the alarm, press push button
),
III until the symbol «e» appears on the
M M
dial SA.
The alarm is activated and it will ring at
the time set, indicated by the dial HA.
The alarm will continue to ring until the
alarm signal power reserve is exhausted
(hand RA in the blue zone) or until it is
stopped manually by pressing push but-
ton III.
The alarm rings every 12 hours if it is
not de-activated. We recommend de-
activating it for at least 30 minutes every
time it rings to avoid any accidental
alarms.
English
Publicité
