Personnel Qualification; Special Hazards - WIKA intelliTHERM TGT73 Mode D'emploi

2. Safety
The technical specifications contained in these operating instructions
must be observed. Improper handling or operation of the instrument
outside of its technical specifications requires the instrument to be
taken out of service immediately and inspected by an authorised
WIKA service engineer.
The manufacturer shall not be liable for claims of any type based on
operation contrary to the intended use.

2.2 Personnel qualification

WARNING!
Risk of injury if qualification is insufficient!
Improper handling can result in considerable injury and
damage to equipment.
The activities described in these operating instructions
■
may only be carried out by skilled personnel who have
the qualifications described below.
Keep unqualified personnel away from hazardous
■
areas.
Skilled personnel
Skilled personnel are understood to be personnel who, based on
their technical training, knowledge of measurement and control
technology and on their experience and knowledge of country-
specific regulations, current standards and directives, are capable
of carrying out the work described and independently recognising
potential hazards.

2.3 Special hazards

WARNING!
Residual media in the dismounted gas-actuated
thermometer can result in a risk to personnel, the
environment and equipment. Take sufficient precautionary
measures.
WIKA operating instructions model TGT73
GB
7