AMIX AFF-2 Série Manuel Utilisateur page 41

WEB INTERFACE
- A or C weighting selection for all Leq
and Fast displays.
- C weighting for peak display.
Offset value to adjust the sensor
level, to match the " audience "
level. When offset differs from 0,
a display is available on AFF front
panel.
Display luminosity setting in
manual mode.
Do not forget to save !
AMIX
Attention : using AFF05 display, stick
the box, otherwise the AFF05 display
will be wrong.
Do not forget to save at the end.
41
Give a name to the site ans
his location. These names
will be used within the "Leq
Visualisation graph"
Select a switching threshold
and a Leq. These values will
switch opto-mos1. The same
applies to opto-mos 2.
Stick "Blink AFF" box: the main
display on AFF series-2 will blink
when Leq will excess GPO1
threshold.
Central display Leq choice : Fast,
1mn, 5mn, 10mn, 30 mn, 60mn
or disable display .
This option is not available on
AFF18. Bottom left display Leq
choice: Fast, Leq1mn, 5mn, 10mn,
30 mn, 60mn or disable display.
This option is not available on
AFF18. Choice to display the peak
level on the bottom right display or
to disable it.
Display luminosity setting in
automatic mode:
- "Indoor"  min luminosity.
- "Outdoor"  max luminosity.
Setting parameters for fullscreen.
AFFseries-2
Next