AMIX AFF-2 Série Manuel Utilisateur page 40

WEB INTERFACE
 IP parameters
Stick that box: as far as the SPL25 and AFFseries-2 are on the same net,
AFF displays the SPL25 date. Do not forget to specify SPL25 IP address
underneath.
AFFseries-2 displays the data from SPL25 (displays SPL25 GPO1 and
GPO2). In that configuration the display does not need the sensor (see
example 1). When a sensor is connected, its measurement are accessed
using AFFseries-2 IP address.
Choose an IP for AFF. It should be under the same net as your routeur.
Example 1 :
if routeur IP is 192.168. .1 then AFF IP will be : 192.168. .xxx
(xxx between 2 and 254)
Example 2 :
If routeur IP is 192.168. .1 then AFF IP will be : 192.168. .xxx
(xxx between 2 and 254)
Attention : - IP address should be unique in the net.
- After IP modification, enter new AFFseries IP address in your browser address
window and validate.
 Internal configuration of the equipment
From this menu one can set:
 The site.
 The accurate localisation on the site.
 Offset
 Opto couplers 1 and 2 thresholds.
 Each opto coupler temporal weighting.
 A or C weighting.
AMIX
1
0
http:// 192.168.x.xxx
1
0
40
Integration example
PS 12V
SPL25
SWITCH
LAN
Next
PS 12V
AFFseries-2