Maintenance And Service; Maintenance And Cleaning - Bosch Quigo Notice Originale

OBJ_BUCH-2562-002.book Page 28 Monday, December 14, 2015 2:32 PM
28 | English
Press the measuring tool into the adapter plate 3 so that the locks of the adapter
plate engage in the holes on two sides of the measuring tool. The adapter plate
can be fastened to the bottom, back and top side of the measuring tool. Check
the tight seating of the measuring tool.
When the adapter plate is mounted on the back, the height of the measuring tool
can be aligned. When it is mounted on the top or bottom, the measuring tool can
be aligned sideways. Turn the fine adjustment screw 2 of the adapter plate to
align the laser line with a reference point.
Laser Viewing Glasses (Accessory)
The laser viewing glasses filter out the ambient light. This makes the red light of
the laser appear brighter for the eyes.
 Do not use the laser viewing glasses as safety goggles. The laser viewing
glasses are used for improved visualisation of the laser beam, but they do not
protect against laser radiation.
 Do not use the laser viewing glasses as sun glasses or in traffic. The laser
viewing glasses do not afford complete UV protection and reduce colour
perception.

Maintenance and Service

Maintenance and Cleaning

Keep the measuring tool clean at all times.
Do not immerse the measuring tool in water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use any cleaning agents or
solvents.
Regularly clean the surfaces at the exit opening of the laser in particular, and pay
attention to any fluff or fibres.
1 609 92A 1EC | (14.12.15) Bosch Power Tools