Operating The Device Safely - Dometic CSMP2 Instructions De Montage Et De Service

Safety instructions
• If this device's power cable is damaged, it must be replaced by the
manufacturer, customer service or a similarly qualified person in order
to prevent safety hazards.
• Do not store any explosive substances such as spray cans with
propellants in the device.
!
CAUTION!
• Disconnect the device from the mains
– before cleaning and maintenance
– after use
• Food may only be stored in its original packaging or in suitable
containers.
A
NOTICE!
• Check that the voltage specification on the type plate corresponds to
that of the energy supply.
• The cooling device is not suitable for transporting caustic materials or
materials containing solvents.
• Disconnect the cooler and other power consuming devices from the
battery before connecting the quick charging device.
2.2

Operating the device safely

D
DANGER!
• Do not touch exposed cables with your bare hands. This especially
applies when operating the device with an AC mains power supply.
A
NOTICE!
• In order to work properly, the cooler must have been standing upright
for at least an hour before you switch it on.
• The cooler has a built-in inclination sensor which switches it off when it
is tilted. Nevertheless, always switch off the cooler before tilting the
cab.
Before switching the cooler on again, let it stand for at least 15 minutes
after lowering the cab.
• Do not use electrical devices inside the cooler unless they are
recommended by the manufacturer for the purpose.
• Install the device in a dry location where it is protected against
splashing water.
8
CSMP2
EN