Glow Fire Bio Burner 24 Guide D'utilisation page 6

Risk of burns!
Because the product and its components become hot during use and remain hot for
some time after the fire has been extinguished.
It is not allowed to touch the product until it has cooled down completely.
Troubleshooting:
Error
Soot formation
Soot formation
Burn time too short
Burn time too short
Flames too high
Flame does not go out
when the slide is closed
Possible Cause
Wrong fuel
Burner slot covered by objects
Wrong fuel (e.g. gel, alcohol)
Burner is not completely filled
Wrong fuel (e.g. gel, alcohol)
Can happen with larger burners
because the ethanol vapor seeks a
way through every small opening
Solution
Use only 100% bio ethanol
Expose the burner opening and
place the decoration only
around the burner slot
Use only 100% bio ethanol
Extinguish the burner, refill
after 30 minutes of cooling
Use only 100% bio ethanol
Repeat the closing process
several times and faster to
interrupt the oxygen supply
6