Safety Instructions - Glow Fire Bio Burner 24 Guide D'utilisation

IMPORTANT: Never extinguish the flame with water!
Maintenance / care instructions:
- Discoloration may form on the top of the burner after use. This is normal and not a reason
for complaint.
- The chimney and the burner chambers must be cleaned regularly. Use warm water and a
gentle detergent.
- Stains can best be removed with a soft cloth and a mixture of lukewarm water and a small
amount of cleaning liquid (pH neutral). Dust can be removed with a dry cloth.
- Please use a special sand-free stainless steel cleaner for the stainless steel surfaces. We rec-
ommend cleaning the stainless steel container regularly to avoid contamination.
- Never use chemicals, steel wool or sponges. This can scratch the surface. The manufacturer
cannot be held responsible for damage caused by incorrect use and / or cleaning of the prod-
uct.

Safety instructions:

- The bio fire will use oxygen from the air in the room in which it is operated. The rooms
should be well ventilated so that sufficient oxygen and fresh air are supplied.
- For the required room size, please refer to the table in the model overview on p. 8
Never leave an open fire unattended!
4