English; User Groups; Care And Maintenance - Weller WXPP Traduction De La Notice Originale

EN

ENGLISH

Faults and defects must be repaired immediately.
operation of the unit.
Use the correct tool.
vices which are included in the list of accessories or appro-
Secure the tool.
workpiece.
Use a solder fume extraction unit. If appliances for
in the Operating Instructions of soldering and desoldering
indoors. Protect against moisture and direct sunlight.

User groups

Due to differing degrees of risk and potential hazards, sever-
Work step
Default soldering para-
meters
cement parts
Default maintenance
intervals
Operation
Filter change
Operation
Filter change
cement parts

Care and maintenance

WARNING
Before doing any work on the machine, pull the
plug out of the socket. Leave the unit to cool down.
12
Find Quality Products Online at:
User groups
Specialist personnel with
technical training
- Electricians
Non-specialists
Technical trainees under the
guidance and supervision of
-
GlobalTestSupply
www.
removed from use.
-
Do not use blocked nozzles.
Repairs must always be referred to a
Weller-trained specialist.
-
Risk of burns
WARNING
•
for at least 3 minutes until the soldering tip has cooled down.
The LED status indicator must be at „OFF".
Temperature performance
The soldering tool has an internal usage sensor which can
The settings can be found in the station's operating instruc-
tions.
Warranty
Gazette).
persons.
.com
sales@GlobalTestSupply.com