NEC AccuSync LCD73VX Manuel D'utilisation page 8

Quick Start
Removing the Base
Note: Always remove the Base when shipping the LCD.
1. Place monitor face down on a non-abrasive
surface.
2. While using your thumbs, press the bottom tabs
upward to unlock.
3. Press the top tabs down to unlock and pull off the stand.
Connecting a Flexible Arm
This LCD monitor is designed for use with a fl exible arm. Please use the attached
screws (4pcs) as shown in the picture when installing.
To meet the safety requirements, the monitor must be mounted to an arm which
guaranties the necessary stability under consideration of the weight of the monitor.
The LCD monitor should only be used with an approved arm (e.g. GS mark).
12 mm
Specifi cations
4-SCREWS (M4)
(MAX depth: 8.5 mm)
–continued
4 x 12 mm with lock washer and fl at washer
M4
100 mm
Thickness of Bracket
(Arm) 2.0~3.2 mm
100 mm
6
Tighten all
screws.
Weight of LCD assembly:
3.9kg - LCD73VX(MAX)
4.3kg - LCD93VX(MAX)
3.9kg - LCD73VXM(MAX)
4.3kg - LCD93VXM(MAX)