NEC AccuSync LCD73VX Manuel D'utilisation page 11

FACTORY PRESET
Selecting Factory Preset allows you to reset all OSD control settings
back to the factory settings. The "1<−>2/RESET" button will need to
be held down for several seconds to take effect. Individual settings
can be reset by highlighting the control to be reset and pressing the
"1<−>2/RESET" button.
EXIT
Selecting EXIT allows you exit OSD menu/sub menu.
LANGUAGE
OSD control menus are available in eight languages.
OSD TURN OFF
The OSD control menu will stay on as long as it is in use. In the OSD
Turn OFF submenu, you can select how long the monitor waits after
the last touch of a button to shut off the OSD control menu. The preset
choices are 10 - 120 seconds in 5 second intervals.
OSD LOCK OUT
This control completely locks out access to all OSD control functions
without Brightness and Contrast. When attempting to activate OSD
controls while in the Lock Out mode, a screen will appear indicating
the OSD are locked out. To activate the OSD Lock Out function, press
"1<−>2/RESET", then "+" key and hold down simultaneously. To de-
activate the OSD Lock Out, press "1<−>2/RESET", then "+" key and
hold down simultaneously.
RESOLUTION NOTIFIER
If ON is selected, a message will appear on the screen after 30
seconds, notifying you that the resolution is not at optimal resolution.
DDC/CI
Turns on or off the two-way communication and control of the monitor.
With DDC/CI turned on, some monitor settings can be adjusted through
the graphics card using a computer.
MONITOR INFO
Indicates the model and serial numbers of your monitor.
OSD Warning:
NO SIGNAL:
This warning appears when there is no signal present. After
power is turned on or when there is a change of input signal or video is
No Signal
inactive, the
RESOLUTION NOTIFIER:
resolution. After power is turned on or when there is a change of input signal
or the video signal doesn't have proper resolution, the
window will open. This function can be disabled in the TOOL menu.
OUT OF RANGE:
resolution and refresh rate. After the power is turned on or there is a change
of input signal or the video signal doesn't have proper timing, the
Range
menu will appear.
OSD Warning menus disappear with SELECT button.
window will appear.
This function gives a warning of use with optimized
This function gives a recommendation of the optimized
9
Controls
Resolution Notifi er
–continued
Out Of