Menu Control - Ruwido easytip Z1 Mode D'emploi

Menu control

To be able to change the basic settings of your TV, the
has an integrated menu control.
easytip Z1
Check in the manufacturers operating manual, if your TV
supports this function.
Press the (M) key quickly. This opens the menu on
Step 1
your TV.
If the menu control works with your stored code,
Step 2
the LED will illuminate continuously.
If, after pressing the (M) key, the LED flashes
quickly, then the stored code does not work with
the TV menu. However, it is possible to control the
brightness and colour with your remote. Please
refer to "Controlling the colour and brightness".
If, after pressing the (M) key, the LED does not
flash, then the stored code does work with either
the TV menu or the colour / brightness functions.
Now you can control the menu by using the
Step 3
(Volume +), (Volume -), (Programme +) and
(Programme -) keys.
To save any changes in the menu press the
Step 4
(OK/Norm) key.
To quit the menu press the (M) key.
Step 5
If you are sure that your TV supports these functions but
your remote does not control them, maybe the wrong
code was programmed. If so try the other codes in the
code list or run the code search mode.
U s e r M a n u a l
Helpline 00800 31133113
11