ShelterLogic 26767 Manuel D'installation page 7

8. TIGHTEN THE COVER WITH
TWIST TITE
™
A. Wrap the cord with plastic ball and "S" hook at the
corners of the cover around the corner leg poles.
Insert "S" hook into the hole of the corner leg poles.
Twist each leg pole until the cover becomes tight.
Twist the leg poles equally to ensure the cover stays
aligned during tightening.
B. Secure the leg poles with the Twist-Tite™ Set.
Wrap the bungee around the side frame
(10056)
connection
(10045)
pole hole that lines up with the corner side frame
connector hole.
9. ANCHOR YOUR CANOPY
There are four holes on each base foot that the anchor can go into.
Select a hole in each base foot. Insert each anchor into the ground
until the round head is touching the base foot.
Insert one anchor into all eight base feet.
This is a temporary spike anchor. Not intended for permanent use.
and insert "S" hook into the leg
Twist-Tite Tighten Cover
™
10045
10043
Page 7
Twist-Tite™ Secure Leg Pole
Cover
Cover
10043
10431
10056
10045
05_26767_E1