5. ATTACH LEGS TO ROOF FRAME
After assembling the legs, lay them next to the canopy near each of the 3 and 4 way connectors.
Attach all legs to one side first. Let the other side of roof frame rest on the ground. Repeat for opposite side.
NOTE: See diagram. Insert one middle leg on one side of the frame, swedged end up. Insert the rest of the
legs on that same side. Repeat for the opposite side.
10043
10050
6. SECURE THE MIDDLE LEGS
TO ROOF FRAME
At the 4 middle legs, align the hole at the
top of the assembled leg with the hole at
the bottom of each 4-way connector.
Insert a short pin (10051) through this hole
to secure leg.
7. SECURE CANOPY COVER
Working from the inside, slide the bungee
fasteners (10066) through the grommets.
BUNGEE-BALL
AND CORD
HIDDEN UNDER
VALANCE
Page 6
10047
10051
OUTSIDE VIEW
OF COVER
10047
10051
INSIDE VIEW
OF COVER
05_26767_E1