Cleaning And Maintenance; Replacing The Fuse - HQ Power HQLE10023 Mode D'emploi

4.3 Connection

Have a qualified electrician carry out the electric connection.

Connect the device to the mains with the power plug. All devices must be powered
directly off a grounded switched circuit. Do not connect to a dimmer pack.

Where the mains plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.

The installation has to be approved by an expert before the device is taken into
service.
5. Overview
Refer to the illustrations on page 2 of this manual.
1 speed adjustment
2 sensitivity adjustment
3 auto/sound mode switch
4 microphone
6.

Cleaning and Maintenance

Before starting any cleaning or maintenance activities:
1. Unplug the device's power cord from the outlet.
2. Let the device cool down.
Cleaning

Use normal glass cleaner and a soft cloth to wipe off the outside casing.

Always be sure to dry all parts completely before plugging the device back in.

Cleaning frequency depends on the environment in which the unit operates (i.e. smoke, fog residue,
dust, dew).

Do not immerse the device in any liquid.
Maintenance

All screws should be tightened and free of corrosion.

The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in
mounting supports, do not change the location of the connections...

Mechanically moving parts must not show any signs of wear and tear.

The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.

There are no user-serviceable parts, apart from the fuse and the lamp.

Refer to an authorized dealer for service and/or spare parts.
6.2

Replacing the fuse

1. Unplug the device's power cord from the outlet.
2. Let the device cool down.
3. Unscrew the fuse holder with an appropriate screwdriver.
4. Replace with an identical fuse.
5. Insert the fuse holder back in its place and reconnect power.
V. 01 – 16/05/2017
HQLE10023
5 fuse
6 power cord
7 bracket + adjustment bolt
5 ©Velleman nv