Important Safety Instructions - Flotec FP0F360AC Notice D'utilisation

Masquer les pouces Voir aussi pour FP0F360AC:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Safety
Im portant Safety
Instructions
SAVE THESE INSTRUCTIONS - This manual
contains important instructions that should be
followed during installation, operation, and
maintenance of the product. Save this manual
for future reference.
This is the safety alert symbol. When you
see this symbol on your pump or in this manual,
look for one of the following signal words and
be alert to the potential for personal injury!
indicates a hazard which, if not
avoided, will result in death or serious injury.
indicates a hazard which, if not
avoided, could result in death or serious injury.
indicates a hazard which,
if not avoided, could result in minor or
moderate injury.
NOTICE addresses practices not related to
personal injury.
Carefully read and follow all safety instructions
in this manual and on pump.
Keep safety labels in good condition. Replace
missing or damaged safety labels.
California Proposition 65 Warning
This product and related
accessories contain chemicals known to the
State of California to cause cancer, birth defects
or other reproductive harm.
Risk of electric shock. Can shock,
burn or kill.
• Do not allow the motor to get wet!
• Use this pump only on a 115 volt circuit.
Pump is equipped with an approved
3-conductor cord and 3-prong, grounding-
type plug. To reduce the risk of electric shock,
connect it to a properly grounded, grounding-
type receptacle.
For parts or assistance, call Flotec Customer Service at 800-365-6832
• If circuit has a 2-prong receptacle, replace
it with a properly grounded 3-prong
receptacle installed in accordance with the
National Electrical Code and local codes
and ordinances.
• Any extension cord used must be outdoor
grade, gauge 16 AWG or heavier, and not
more than 25' long.
Risk of fire and explosion. Can
cause severe injury, property damage or
death. Pump water only with this pump. Pump
is designed to pump water at temperatures
between 32°-77° F (0°-25° C) only.
Risk of burns. During normal
operation, motor will normally run hot enough
to burn you. Do not touch motor when it is hot.
NOTICE This unit is not designed for
applications involving salt water or brine! Use
with salt water or brine will void warranty.
Performance
Total Lift in feet (m)
0 (0)
10 (3)
20 (6.1)
Capacity in Gal/Hour (Liter/Hour)
350
300
(1,325)
(1,136)
30 (9.1)
40 (12.2)
240
145
62
(908)
(549)
(235)
2

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cyclone fp0f360ac

Table des Matières