Using The Appliance - Philips FC9219 Mode D'emploi

- Crevice tool and small nozzle.
Note: Make sure the suction opening of the small nozzle points away from the
holder.
- Crevice tool and small brush.
Note: Make sure the suction opening of the small brush points towards the
holder.

using the appliance

1 Pull the cord out of the appliance and put the mains plug in the wall
socket.
2 Press the on/off button on top of the appliance to switch on the
appliance.
3 During vacuum cleaning, you can adjust the suction power with the
knob on top of the appliance.
- Use maximum suction power to vacuum very dirty carpets and hard
floors.
- Use minimum suction power to vacuum curtains, table carpets, etc.
4 If you want to pause for a moment, insert the ridge on the nozzle
into the parking slot to park the tube in a convenient position.
English
11