Audiovox Rampage ACD-16 Manuel D'utilisation page 8

pressed, the next lower track number will
be selected as shown on the display panel.
9 9 9 9 9
DISC SELECT (
During CD changer operation, this button
is used to select the desired disc play. To
advance to a higher number disc, press the
CD+ button. To decrement to a lower
number disc, press the CD- button. The
number of the disc in play will be shown on
the display panel.
bl bl bl bl bl
CD PLAY/PAUSE SELECTOR (
During CD player and CD changer
operation, pressing this button will
temporarily stop play of the disc (the
indication will flash on the display panel).
Press the button again to resume play of
the disc from the point at which it was
stopped.
bm bm bm bm bm
AUDIO MUTE SELECTOR (MUTE)
Press this button to mute the volume from
the unit (MUTE will appear on the display
panel). Pressing the button again or
adjusting the Volume control
to the volume level setting in use before the
Mute function was activated.
bn bn bn bn bn
LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel
displays the frequency and activated
functions.
NOTE: It is a characteristic of LCD panels
that, if subjected to cold temperatures
for an extended period of time,
they may take longer to illuminate
than under normal conditions. In
addition, the visibility of the numbers
7 7 7 7 7
on the LCD may slightly decrease.
)
CD- CD+
)
2
will return
The LCD read-out will return to
normal when the temperature
increases to a normal range.
bo bo bo bo bo
DISC SLOT
With the label surface facing up, fully
insert a compact disc into the slot until
the soft-loading mechanism engages and
pulls the disc in. The LOAdCd indication
will momentarily appear on the display panel
followed by CdP and the playing time of the
disc. Disc play will then begin with the track
number and rotating disc play symbol (
on the display panel.
NOTE:This unit is designed for play of
standard 5" (12cm) Compact Discs
ONLY. Do not attempt to use 3"
(8cm) CD-Singles in this unit, either
with or without an adapter, as
damage to the player and/or disc
can occur. Such damage will not be
covered by the Warranty on this
product.
bp bp bp bp bp
DISC EJECT (EJ)
Disc play is stopped and the disc is ejected
by pressing this button (EJCd will appear on
the display panel). Remove the disc and
insert another disc into the unit to begin play
of the new disc or press the Function Mode
cm cm cm cm cm
Selector to choose radio or CD changer
mode operation. Discs will be ejected
when the button is pressed and the ignition
switch is on.
Radio or CD changer operation will
automatically resume depending on which
mode was in operation prior to disc play. If
the disc is not removed from the unit within
10 seconds of being ejected, it will
automatically be re-loaded into the unit to
)
128-5807C
8 of 44