6.2
Switching off the whirlpool tub
>
Wait until the tub is completely drained and the 2-minute drying mode is finished
(air nozzles automatically activated, "Air" button flashes).
>
Switch off the main switch.
6.3
Jet nozzles
Switching on / off
>
Press the "Jet" button.
The nozzles are switched on/off (water massage).
!
Turning on the jet nozzles also activates the heater and UV Hygiene Management
system.
Changing the massage type
>
Press the "Jet" button until it flashes.
Setting buttons are now activated and illuminated.
>
Press the "
" button.
Water-and-air massage is activated.
>
Press the "
" button a second time.
Water massage with rotating air supply is activated.
>
Press the "
" button a third time.
Water massage is reactivated.
Concentrating massage intensity at foot- or back nozzles
>
Turn the selector in the direction of the foot or back nozzles.
Massage intensity is concentrated at the foot or back nozzles.
Changing the direction of the massage stream
>
Rotate the ball of the jet nozzle until you find the most pleasing direction for the
massage stream.
27