Operation; Switching On The Whirlpool Tub; Switching Off The Whirlpool Tub; Switching The Air Nozzles On / Off - DURAVIT Combi-System P Notice D'utilisation

5. Operation

Note! Disinfect the whirlpool system before using it for the first time, and then after
every tenth bath, but at least one a month and after a long period of no use.
5.1

Switching on the whirlpool tub

Note! Switch off the whirlpool tub when finished.
> Switch on the main switch.

5.2 Switching off the whirlpool tub

Note for 2nd floor! After the water has drained, wait at least 5 min. before switching
off the whirlpool tub, so that the residual water drain lines can open automatically
(sound of motor).
> Wait until the tub has emptied completely.
> Your whirlpool tub comes with a residual water drain feature as standard. In addi-
tion, you can remove any remaining water from the lines to the air nozzles with the
aid of the blower:
Just activate the air nozzles for 2 minutes.
> Switch off the main switch.

5.3 Switching the air nozzles on / off

> Press the "Air" button.
The nozzles are switched on / off.
22