afx light HAZE950 Manuel D'utilisation page 4

When no fluid is left in the tubing, the pump will stop working and the LCD display will be flashing.
Once you have filled the tank, there are 2 ways to re-start the pump:
•
If the unit has been controlled manually via the smoke output knob, adjust the output to 0 first and then to 100.
The unit will restart working after 2 minutes.
•
If it has been DMX controlled, set channel 2 to OFF and then to ON. The unit will restart working in 2 minutes.
Product overview
1. Hanging bracket
6. Fluid level indicator
11. Power socket
Button Instructions
Digital Display
2. Press MENU to change page
© Copyright LOTRONIC 2016
2. Safety ring 3. Nozzle
7. Antenna 8. Digital display
12. Power switch 13.DMX socket
MENU button: Different pages can be chosen, there are 4 pages in total
UP: Increase value for subpages
DOWN: Decrease value for subpages
ENTER: Confirm or exit
1. Heat page
The machine is heating. When the unit has reached working temperature, the output
page will show per default.
a. Haze output page
When the unit has reached working temperature, the haze output can be adjusted by
the knob on the operation panel and the display shows an output value: 0 = OFF, 100 =
max.
b. Fan speed page
The fan speed volume can be adjusted by the knob on the operation panel and the
display shows the output value: 0 for OFF, 100 for max.
4. 3l tank 5. Knob
9. Fan adjustment 10. Haze adjustment
14. Fan
Page 4