Symbols; Safety Information; Unpacking And Inspection; Feature - Beha-Amprobe 2100-Alpha Manuel De L'utilisateur

SYMBOLS


Caution! Risk of electric shock.
W
Caution! Refer to the explanation in this manual.
The equipment is protected by double insulation
T
or reinforced insulation.
Equipment for working under live voltage
P
Complies with European Directives.
Conforms to relevant Australian standards.
Do not dispose this product as unsorted municipal
=
waste. Contact aqualified recycler.
Battery

SAFETY INFORMATION

The voltage tester complies with:
IEC 61243-3:2009, EN 61243-3:2010, DIN VDE 0682-401:2011
For Use by Competent Persons
Anyone using this voltage tester should be knowledgeable
and trained about the risks involved with measuring
voltage, especially in an industrial setting, the importance
of taking safety precautions and of testing the voltage
tester before and after using it to ensure that it is in good
working condition.
W Warning: Read Before Using
To avoid possible electric shock or personal injury:
• The operating instructions contain information and
references required for safe operation and use of the
voltage tester. Before using the voltage tester, read
the operating instructions carefully and follow them
in all respects.
• Failure to follow the instructions or to comply with
warnings and references may result in perilous to the
user and damage to the voltage tester.
• If the voltage tester is used in a manner not specified
by the manufacturer, protection provided by the
voltage tester may be impaired.
• Comply with local and national safety requirements.
• Use proper protective equipment as required by local
or national authorities.

UNPACKING AND INSPECTION

Your shipping carton should include:
1 2100-Alpha or 2100-Beta or 2100-Gamma
Voltage Tester
2 GS 38 protective probe caps
2 4mm Ø test probe extension (screwable)
2 1.5V alkaline batteries (installed)
1 User manual
If any of these items are damaged or missing, return
the complete package to the place of purchase for an
exchange.
FEATURES
The Beha-Amprobe 2100 series are rugged and easy-to-use
two pole voltage testers for voltage and continuity checks.
The 2100 series are for electricians in industrial and
commercial applications for use in a wide voltage range
and safety rating are built according to latest voltage
tester standard EN 61243-3:2010 and are GS approved.
Voltage range:
2100-Alpha / 2100-Beta: 12...690 V AC/DC
2100-Gamma: 6...1000 VAC / 6...1200 VDC,
Safety rating (overvoltage category):
2100-Alpha / 2100-Beta: CAT IV / 600 V, CAT III / 690 V
2100-Gamma: CAT IV / 600 V, CAT III / 1000 V
4