Layout And Items Supplied - EINHELL GE-CM 36/37 Li Mode D'emploi D'origine

reached a complete standstill.
- before you dislodge any blockages or clogs
in the chute.
- before you carry out any checks, cleaning,
maintenance or other work on the lawn
mower.
- If you have struck a foreign object.
Examine the mower for signs of damage
and carry out any necessary repairs before
restarting and continuing to work with the
mower.
- if the lawn mower begins to experience
exceptionally strong vibrations, immediately
switch it off and check it.
q) Switch the mower off , pull the safety plug and
make sure that all moving parts have reached
a complete standstill.
Maintenance and storage
a) Make sure that all nuts, bolts and screws are
tightened securely and that the machine is in
safe working condition.
b) Allow the mower to cool before you put it into
an enclosed area.
c) To avoid the risk of fi re, keep the motor
housing and ventilation slots clear of grass,
leaves, oil and grease.
d) Routinely check the grass basket for signs of
wear and impaired functionality.
e) For your own safety, have worn or damaged
parts replaced without delay.
f) Take care not to jam your fi ngers between
moving blades and stationary parts of the
equipment while you are adjusting the
equipment.
g) While you are carrying out maintenance work
on the blades, remember that the blades can
still be moved even if the power source has
been switched off .
Explanation of the symbols used (see Fig. 16)
1 "Warning - Read the operating instructions to
reduce the risk of injury"
2 Keep your distance!
3 Caution! - Sharp blades – Pull out the safety
plug before carrying out any maintenance
work.
The blades will continue to rotate after the
motor is switched off .
4 Protect the equipment from rain and damp
conditions
5 For use in dry rooms only
6 Safety class II
Anl_GE_CM_36_37_Li_USA.indb 12 Anl_GE_CM_36_37_Li_USA.indb 12
EN
7 Store the batteries only in dry rooms with an
ambient temperature of 50°F - 104°F (+10°C
- +40°C). Place only fully charged batteries in
storage (charged at least 40%).
SAVE THESE INSTRUCTIONS

2. Layout and items supplied

2.1 Layout
1. Top push bar
2. Safety lock-off
3. Switching bar
4. Joint
5. Catch basket
6. Central cutting height adjustment
7. Ejector fl ap
8. Carry-handle
9. Cutting tool cover
10. Grass catch basket, carry-handle
11. Grass catch basket, without carry-handle
12. Filling level indicator
13. Battery capacity indicator button
14. Battery capacity indicator
15. Pushlock button
16. Quick-tightening screws with lever
17. Safety plug
18. Rechargeable battery
19. Charger
20. Additional open-ended wrench
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
- 12 -
23.09.2020 11:17:45 23.09.2020 11:17:45