Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Introduction
MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We wish you much joy and success in working with your
new appliance.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs
due to the non-compliance of the electric regulations
and VDE regulations 0100, DIN 57113 / VDE0113.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device. The operating instructions are intended to
help the user to become familiar with the machine
and take advantage of its application possibilities in
accordance with the recommendations. The operating
instructions contain important information on how to
operate the machine safely, professionally and eco-
nomically, how to avoid danger, costly repairs, reduce
downtimes and how to increase reliability and service
life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regulati-
ons that apply for the operation of the machine in your
country. Keep the operating instructions package with
the machine at all times and store it in a plastic cover
to protect it from dirt and moisture. Read the instruc-
tion manual each time before operating the machi-
ne and carefully follow its information. The machine
can only be operated by persons who were instructed
concerning the operation of the machine and who are
informed about the associated dangers. The minimum
age requirement must be complied with.
Device description and delivery con-
tents Fig.1
1.
Carrying handle
2.
Device socket
3.
Front runner wheel
4.
Hose connector
5.
Tank
6.
Rear runner wheel
7.
Closure
8.
On/off switch
9.
Filter bag
10. Carbon brush
11. Hose
12. Handle with air control
13. Bottom nozzle
14. Flat nozzle
15. Round nozzle
16. Telescope tube
General information
• After unpacking, check all parts for possible trans-
portation damages. In the event of complaints, in-
form the supplier immediately. Any complaints made
after this time will not be accepted.
• The shipment is to be checked for completeness
upon receipt.
• Read through the manual carefully in order to make
yourself familiar in dealing with the device before
using it for the first time.
• Only use original equipment regarding accessories,
as well as consumable items and spare parts. Spare
parts can be obtained from your specialized dealer.
When ordering, please specify our part numbers, as
well as type and construction year of the device.
Intended use
The wet and dry vacuum cleaner is designed for wet and
dry vacuuming using the appropriate filter. The appliance
is not suitable for the vacuuming of combustible,
explosive or harmful substances. The machine is to
be used only for its prescribed purpose. Any other use
is deemed to be a case of misuse. The user / operator
and not the manufacturer will be liable for any damage
or injuries of any kind caused as a result of this. Please
note that our equipment has not been designed for use in
commercial, trade or industrial applications. Our warranty
will be voided if the machine is used in commercial, trade
or industrial businesses or for equivalent purposes.
GB
11
Publicité
Table des Matières
