Installing The Heater - EUROM Q-time 2000 Manuel D'utilisation

Deviations of points <5>, <6>, and/or <7> can cause damage, fire
and/or personal injury. This cancels the warranty and the
manufacturer, importer and/or supplier do not accept any liability for
the consequences.
Description
Front heating element
1. Heater housing
2. Grille
3. Quartz lamp (2x)
4. Operating switch (2x)
5. Electrical cable with plug
Back of heating element
6. Bracket (for hanging the
patioheater)
7. Hanging screw
A wall bracket, plugs and screws (not
illustrated) are supplied for wall mounting
Standard (only S version)
8. Base
9. Stand, bottom section
10. Stand, middle section
11. Stand, top section
12. Stand, adjustable section
13. Protective cover
14. Cable guide
15. Black locking screw
16. Fixing screws for stand

Installing the heater

Remove all package material (including the shock absorbing material around the
bulb) before installing the heater and check the appliance, supply cord and the plug
for signs of damage.
Carefully choose the right place to install your heater.
Before fastening, check that the minimum safe distances between the surroundings
and the chosen location are respected:
Minimum distance lowest point of heater – floor: 1,8 metres
Minimum distance heater – heated object: 1 metre
21