Water Hardness - Gaggia SYNCRONY DIGITAL Mode D'emploi

ENGLISH
Now press "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ "to select
RINSING
RINSING
OFF
ON
and store the selection by pressing "ENT".
We recommend selecting:
RINSING
ON

WATER HARDNESS

The hardness of tap water may vary from region
to region. For this reason, the appliance may
be adjusted according to the degree of hardness
of the water in the place it will be used in;
hardness is measured on a scale of 1 to 4.
The appliance is already programmed for
an average value (hardness 3). The
appliance setting should be adjusted
according to the actual hardness of the water,
which can be measured using the test strip
provided.
Briefly dip (1 second) the test strip provided
in water and shake it gently. After one mi-
nute you can read the test results on the
strip.
• After accessing the programming mode press
"∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ " to select the function:
WATER HARDN.
and enable it by pressing "ENT".
• The display will show:
WATER HARDN.
HARDNESS 3
• Check the test strip previously immersed in
water to see how many squares have changed
colour.
• Press "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ " to select the correct water
hardness (e.g. 2 squares = Hardness 2) and
memorise it by pressing "ENT".
Caution: descale the appliance when
the max water hardness level is reached.
The display will show the message:
DESCALING
READY FOR USE
CUP HEATERCUP HEATER
This function is used to activate the device for
warming up cups on the machine.
• In the programming mode, press ∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ "
to select the function
CUP HEATER
and enable it by pressing "ENT".
• At this point the machine will display the
indication:
CUP HEATER
ON
and you must choose between on and off by
pressing "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ ". Press "ENT" to confirm
your choice.
TEMPERATURE
This function allows you to adjust the water tem-
perature to obtain hotter or less hot coffee
(Minimum, low, medium, high and maximum).
• After accessing the programming mode press
"∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ " to select the function:
TEMPERATURE
then enable it by pressing "ENT".
The display will show, for example:
TEMPERATURE
MEDIUM
• Press "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ " to select the desired tem-
perature and memorise it by pressing "ENT".
PRE-BREWING
In the pre-brewing process the coffee is slightly
moistened before actual brewing. This brings out
• 36 •
CUP HEATER
or
OFF