Maintenance; Cleaning; Storage; Transport - Rothenberger Industrial HS-060Y Mode D'emploi

Maintenance

The soldering station requires very little maintenance.
- Remove soot on the soldering tip using a fine
- sandpaper to ensure clean working.
- Only use spare parts / accessories from the manufacturer.
- Repairs should only be carried out
- by skilled personnel or an authorised service centre.
- Skilled personnel are those with appropriate training and
- experience, who know the construction and design requirements of the
soldering station and understand the safety regulations.
- The tips
time to time.

Cleaning

Make sure that liquids do not get into the
soldering station.
• Clean the soldering station with a slightly dampened cloth. Do not use
aggressive cleaning agents, solvents or petroleum spirit.

Storage

• Allow the soldering station to cool down completely before storage.
• Clean the soldering station before storage.
• If the soldering station is not being used, keep it in a safe, cool, dry and
well-ventilated place, out of the reach of children.

Transport

• Use the original packaging and secure the soldering iron in place during
transport.
1500003258_Anleitung_DE_GB_FR.indb 29 1500003258_Anleitung_DE_GB_FR.indb 29
7 10
/ wear out after some time and need be replaced from
CAUTION!
Maintenance, cleaning, storage and transport
29
29.11.2019 08:31:16 29.11.2019 08:31:16