Before Use; Check The Soldering Station And Scope Of Delivery; Mounting The Retaining Spring; Mounting / Replacing The Soldering Tip - Rothenberger Industrial HS-060Y Mode D'emploi

Before Use

Before Use

Check the soldering station and scope of delivery

• Remove the soldering station from its packaging.
• Check whether the delivery is complete (see chapter: "Scope of delivery
/ Description of parts")
• Check the soldering station and accessories for damages.
• If this is the case, do not use the soldering station. Contact the
manufacturer at the service address indicated on the warranty card.

Mounting the retaining spring

Press the retaining spring
into the opening provided in the
control unit and soldering stand
and fix it like this.

Mounting / replacing the soldering tip

CAUTION!
Allow the soldering station to cool down completely before you
change the soldering tip.
Some soldering tips are very sharp. Always wear protective
gloves and / or use pliers when changing the soldering tips.
24
1500003258_Anleitung_DE_GB_FR.indb 24 1500003258_Anleitung_DE_GB_FR.indb 24
14
firmly
3
3
14
29.11.2019 08:31:15 29.11.2019 08:31:15