Rothenberger Industrial HS-060Y Mode D'emploi page 23

i) Remove or change the soldering tip only when the
soldering station is switched off and the soldering tip has
cooled down.
j) Do not touch the hot soldering tip, the melted solder or hot
components while soldering. There is a risk of burns.
k) The soldering stand can become hot when the soldering
iron is placed on it. Danger of burns!
l) Do not bring flammable or heat-sensitive objects close to
the hot soldering iron.
m) Avoid contact between the hot parts of the soldering iron
and the plastic parts of the soldering iron stand.
n) Do not leave the soldering iron unattended while it is
switched on.
o) Do not carry out any soldering work on live parts.
p) Always use in a well-ventilated space. Toxic fumes can be
produced when soldering, which can lead to damage to the
mucous membranes and/or chronic respiratory illness.
q) Wear eye protection.
r) The supplied solder wire contains resin. May give rise to
allergic reactions.
s) Solder can contain lead. Do not eat, drink or smoke while
soldering. Always wash your hands thoroughly after
finishing work.
t) Always disconnect the soldering iron from the mains after
use.
u) Do not cool the soldering iron using water.
1500003258_Anleitung_DE_GB_FR.indb 23 1500003258_Anleitung_DE_GB_FR.indb 23
General
23
29.11.2019 08:31:14 29.11.2019 08:31:14