LENCO ODR-150 Mode D'emploi page 9

Please note that the available DAB+ radio stations differ per region/city
DAB Mode- Manual tune
This function allows a specific or new ensemble to be manually added to the stations already
available on the radio.
In DAB mode, press the "Menu" button and use the "Enter" knob to navigate until "Manual tune" is
highlighted, press the "Enter" knob to confirm.
Use the "Enter"knob to navigate until the desired frequency is selected and then press the
"Enter"knob, the frequency and name of the ensemble and the signal strength will be displayed.
Press the "Enter"knob again to add the ensemble and automatically tune to that station.
DAB Mode- Prune
This function will remove unavailable stations from the station list. Press the "Menu" button.
Use the "Enter" knob to navigate to "Prune" option, then press the "Enter" knob to confirm.
Rotate the "Enter" knob to select (yes) to proceed to prune the invalid/unavailable stations.If (No) is
selected the operation will be cancelled.
DAB Mode- DRC
DRC is dynamic range compression, and it is about increasing the loudness of the quieter parts of
the audio signal, and decreasing the loudness of the louder parts.
In DAB mode, press the "Menu" button, then use the "Enter" knob to navigate until "DRC" is
highlighted. Press the "Enter" knob to confirm.
Now use the "Enter"knob to cycle through off, high, low level. Press the "Enter" knobto confirm your
choice.
DAB Mode- display mode
This function will display various information about the current station.
Press the "Enter" knob repeatedly to scroll through the following information:
DLS(dynamic label segment)/ Radio text- The radio station may include a scrolling message about
the current program.
9