Functional Description - Lehmannaudio Black Cube Mode D'emploi

36 Black Cube/Black Cube SE

Functional description

EN
In this chapter you will learn more about the connections,
controls and also the application possibilities of your
Lehmannaudio Black Cube/Black Cube SE phono stage.
Input
1
1 | Ground terminal (GND)
If your record player has a separate ground cable, please connect it here. The
terminal is suitable for connecting a cable, flex, open cable ends, cable lug or
4 mm banana plug.
2 | Input jacks (IN)
Connect the cables coming from your record player to these jacks. The left jack
(black) is for the left channel, the right jack (red) for the right channel. Please be
sure to connect the channels correctly.
2
Output
3
3 | Output jacks (OUT)
RIAA filtered high-level output. Connect the cables that either lead to the input
of a downstream high-level pre-amplifier (high-level inputs are labelled 'Line',
'AUX', 'CD', 'Tuner' etc.) or directly to a power amplifier with volume control.
Here too, please be sure to connect the cables to the correct channels. When
the device is viewed from above, the respective matching channels are arranged
in a line.
Black Cube/Black Cube SE 37
EN
4 5