Philips FC6149 Mode D'emploi page 11

Remove the ilter unit from the dust compartment (Fig. 16).
2
Empty the dust compartment by shaking it with your free
3
hand (Fig. 17).
If necessary, clean the dust compartment with a damp cloth.
4
If necessary, clean the ilter unit. See section 'Cleaning the ilter
5
unit'.
To reattach the dust compartment, align the slot on the dust
6
compartment with the projection on the appliance. First attach the
bottom of the dust compartment (1). Then push the top of the dust
compartment towards the appliance (2) until it locks into place
('click') (Fig. 18).
Cleaning the ilter unit
Make sure you clean the ilter unit regularly.
Turn the outer ilter anticlockwise (1) and remove it from the ilter
1
holder (2) (Fig. 19).
Leave the inner ilter attached to the ilter holder.
Clean the inner ilter and the outer ilter with a brush or with a
2
normal vacuum cleaner if they are very dirty.
Note: If necessary , you can clean the inner ilter and the outer ilter in cold
or lukewarm water. Dry the inner and outer ilter thoroughly before you use
the ilter unit again.
Place the outer ilter back onto the ilter holder (1) and turn it
3
clockwise to attach it (2). (Fig. 20)
Put the ilter unit back into the dust compartment (Fig. 21).
4
Note: Make sure you insert the ilter unit in the correct way.
English
11