Again Operation; Service - UWE JETStream MIRO 1 Instructions De Montage Et Mode D'emploi

4.6 Again- operation
Before putting into operation again, screw in the discharging screw, open valves and fill the pool. Before switching on, rotate
the pump by hand several times at the ventilating fan in the direction shown.

5 SERVICE

Operate the unit only in perfect condition. Take care to have it regularly checked and serviced. When
repairing or bringing into operation again, ensure that tampering has not occurred.
The unit is only to be serviced by authorized persons. Do not conduct any work which might have impair
on the safety of the unit. Only buy original spares from your dealer or uwe.
6 FITTING INSTRUCTIONS FOR HANDGRIPS
Mounting:
1. Fix upper end cap to pool wall as shown.
30,5
5,5
20
dimensions in cm
Fitting in steel, aluminium or polyester pools
srew
cap
handgrip
5,5
dimensions in cm
buse
5,5
pool wall
gasket
back plate
19
Fitting in concrete shuttered pools
handgrip
5,5
srew
cap
dimensions in cm
beton
wall plug