nVent RAYCHEM AT-TS-14 Instructions D'assemblage page 2

THERMOSTAT nVent RAYCHEM AT-TS-14
GB
Temperature range 0 °C à +120°C
Control and ambient thermostat in a plastic enclosure
For use as:
1. Control thermostat in trace heating systems
2. Ambient thermostat in trace heating systems for frost protection
Wiring diagram
1 2
L N
Jumper 1-5 included in scope of supply
Technical data:
Supply voltage
Max. switching current
Max. conductor size
Green LED
Red LED
Red LED
Switching differential
Switching accuracy
Switch type
Adjustable temperature range
Enclosure:
Temperature setting
Exposure temperature
Ingress protection
Entries
Weight (without sensor)
2 | nVent.com
3 4 5 6
Heater/Relay
230 V +10%/–15%, 50/60 Hz
16 A, 250 V AC
2.5 mm
Heating cable on
Sensor break
Sensor short circuit
0,6 –1 K
± 2 K at 60°C (calibration point)
SPST (normally open)
–0°C to +120°C
inside
–20°C to +50°C
IP 65 according to EN 60529
M 20 for supply cable, M 25 for the connection to the heating
cable (not direct) and M 16 for the sensor cable.
+/– 440 g
8 9
_
bl + br
ϑ
ϑ
Sensor
2
Dimensions: 122x120x55 mm
122
Raychem