Loosen the screw on the plug cover
5.).
Remove the plug cover 6.).
Connect the power cord 7.).
Reinstall the plug cover 8.).
Tighten the screw on the plug cover
9.).
11.
Slightly loosen the screws on the
back of the appliance 10.).
Push the supplied cord cover into the
slots of the side panel heater.
Hook the cord cover onto the screws
on the back of the appliance 11.).
Now tighten the screws 12.).
en - Securing a side-by-side combination
Connecting the refrigeration
appliances
Push the appliances together at the
back until the hinge halves engage.
Insert the pins into the hinge halves
from the top.
Push the appliances as close to-
gether as possible at the front.
7