Battery Clip; Troubleshooting - Heiniger Saphir Basic Traduction De La Notice Originale

Charging station
1
Fig. 22
Contacts
Clean the contacts of the battery and the shearer with a dry cloth as nec-
essary.

6.2.6 Battery clip

2
Fig. 23
Fig. 24
NOTE!
If not using daily, store shearer and charging station in the packaging sup-
plied with them. When in use daily, we recommend to put clipper and re-
serve battery in the charging station.
7

Troubleshooting

y The here described tasks for troubleshooting can be done mostly by the
operator.
y Some tasks only may be done by especially trained personal or by an
authorised service centre. These tasks are marked with (S).
16
1. Disconnect the charging station from
2. If necessary, take away hairs from
3. Wipe the contacts (1) clean with a
The battery clip is for storage of the sec-
ond battery. The battery clip (1) clicks
into the charging station (2). Use of the
1
battery clip is optional.
1. Insert the battery as shown (Fig. 25),
Translation of the original instructions / Small animal clipper
the power supply.
both charging cavities.
dry cloth.
with the contacts facing downwards.
Either insertion orientation can be
used.