DS Produkte MAXXMEE K1201 Mode D'emploi page 26

EN
(Picture D)
1. Place the mixing container (5) on the kitchen unit or an-
other dry and clean work surface.
2. Plug the blade insert (4) onto the axis in the middle of the
mixing container. Check whether it can be twisted.
3. Place food in the mixing container.
4. Place the splash guard (3) onto the blade insert. It must
rest on the mixing container without any gap.
5. Place the motor unit (2) on the splash guard. Check that it
fits correctly.
6. To switch on the device, press the
hold it down for no more than 15 seconds. The blade
insert rotates while the
7. Let go of the
8. Repeat steps 6 and 7 until the food is chopped up as you
want.
9. Wait until the blade insert has come to a standstill. Only
then should you detach the motor unit.
10. Carefully remove the splash guard and the blade insert.
11. Empty the mixing container.
12. Clean the device after every use. Do not allow any food
residues to dry on (see the "Cleaning and Storage"
chapter).
24
Start button is pressed.
Start button. The blade insert stops.
Start button (6) and