Sony DSRM-E1 Mode D'emploi page 30

Editing
26 EN
2
Press the horizontal arrow
buttons to select ENTRY,
then press the SEL/PUSH
EXECUTE button.
This displays the CUT DATA
menu.
3
Use the up and down arrow
buttons to select the cut
numbers.
4
Press the horizontal arrow
buttons to select the cut you
wish to adjust. The left arrow
moves to the previous cut,
and the right arrow to the next
cut.
5
Use the up and down arrow
buttons to select the edit point
(IN or OUT point) you wish
to adjust.
6
Press the horizontal arrow
buttons to adjust the frame
number. The left arrow moves
to the previous frame, and the
right arrow moves to the next
frame.
By holding the button down
you can change the setting in
second units.