Recorder Preparations; Player Preparations - Sony DSRM-E1 Mode D'emploi

Editing
Source tape Recorder
DV DVCAM (NDF setting)
DV DVCAM (NDF setting)

Recorder preparations

Player preparations

22 EN
When a DV format tape is recorded on a DVCAM recorder
through a DV connection, even if non-drop-frame is specified,
the indication on this unit is drop-frame. This is because the
tape recording format is incorrect. Discrepancies therefore arise
in the "DUR" and "TOTAL" indications given for the tape.
However, if recorded on a DVCAM recorder through an analog
connection, a correctly formatted DVCAM tape is obtained and
the problem can be eliminated.
1
Power on the Video Walkman.
2
Set the POWER switch on
the interface adaptor to the
ON position.
The power indicator lights
on the front panel of the
interface adaptor.
3
Load the cassette on which you wish to record the program
in the recorder.
1
Power on the player.
2
Load the cassette containing the material in the player.
Note
To prevent the possibility of loss, set the cassette to be
write-protected.
Make any necessary settings so that the time or other
information does not appear on the playback image.
This is to make sure that the information is not
superimposed on the edited result.
Connection LANC indication
i.LINK DF
analog NDF