Christopeit Sport Horse Glider Notice De Montage Et D'utilisation page 15

Step 3:
Attach the handlebar (6) and computer (36).
1. Slide the handlebar (6) into the holder of handle post (5) sothat
the holes align and secure the handlebar (6) with screw M5x15
(33). Then push the hand grips (35) onto the handlebar (5).
2. Put the computer (36) to the holder of handle post (5) and put
the plug of connection cable (34) into the socket from compu-
ters (36) backside.
Insert the battery (Type "AAA"-1.5 V pencell) by watching for
the right polarity on the back of the computer (36). (The battery
for the computer is not included in this item. Please buy them
at your located market.)
Step 4:
Checks
1. Check the correct installation and function of all screwed and
plug connections. Installation is thereby complete.
2. When everything is in order, familiarise yourself with the ma-
chine at a low exercise units and make your individual adjust-
ments.
Note:
Please keep the tool set and the instructions in a safe place as
these may be required for repairs or spare parts orders becoming
necessary later.
15