Rear Panel Features - ION PROFILE PRO Guide D'utilisation Rapide

REAR PANEL FEATURES

1. Power Cable: This power cable should be plugged into a wall receptacle AFTER all audio
connections are made.
2. RCA Audio Output Cables: These cables should be plugged into the audio inputs of your
home stereo system. (Please note: you can still copy records to your computer, even if the
audio outputs of the turntable are not connected to a stereo system).
IMPORTANT WARNING: The RCA cables are LINE level. Please only connect these
cables to LINE level inputs. You may damage your receiver if you plug in a LINE
level into a PHONO input.
3. 1/8" Stereo Line Input: Connect Tape Players, Reel to Reel, or any other audio source
here. This signal is sent to the computer through the USB. Make sure that your RCA
cables are either plugged into speaker system or not in contact with metal.
4. USB Audio Output: Use the included USB Cable to connect your turntable to your
computer. The USB connection will provide audio from the turntable and stereo input to
your computer. For transferring your vinyl records to your computer, we have provided two
different software packages on the included CD. EZ Vinyl/Tape Converter (PC) and EZ
Audio Converter (Mac) are the easiest and quickest ways to transfer your vinyl records and
should be used if you are a beginner.
2 3 4 1
4