Working Problems - FAR KJ 45 Mode D'emploi

WORKING PROBLEMS (fi g. f7-f8-f9)
When the conditions require a forced unscrewing of the tie rod from
the insert, act as follows:
remove the push rod (P) from its seat (f7) and introduce it into the hole
in the lower part of the tensile-strength button (D) pushing it slightly.
ATTENTION! Carry out this operation keeping the
riveting tool fi rmly in order to avoid sharp movements
which could damage people or things (f8).
When the tie rod is free from the insert, put the rod back in its seat
for not loosing it (f9).
16
GB
P
D
P
f7
Date 10-2008
P
KJ 45 KJ 45
f8
P
f9
Revision - 04