98
Care and cleaning
If necessary pull out and clean the filter
with warm water using a wiper or brush.
Clean the inside of the door, the fluff fil-
ter chamber and the rubber seals of fluff.
6. Insert the fluff filter into the base a . In-
sert the second fluff filter into the filter
housing (it has to audibly lock) and slide
it inside the filter chamber b . Close the
door in plinth. Note: If the fluff filter is
not inserted in the filter housing, the fil-
ter housing cannot be slide into the ap-
pliance base.
7. As necessary, approx. once every 6
months, remove the fluff from the heat
exchanger using the sponge supplied.
When doing this, please use rubber gloves.
Tip: The fluff can be removed more easily if
it is first dampened (e. g. with a laundry
dampener) or with the help of vacuum clean-
er.
To clean the drum
CAUTION!
Do not use abrasive materials to clean the drum. Use a soft detergent to clean the inner
side of the drum and the drum blades.
Keep the inner surface of the drum and the drum blades clean. The minerals from the
water or cleaning agents can collect on the inner surface of the drum. This cause that
the laundry is not sufficient dry.
Clean operating screen and housing
CAUTION!
Do not use furniture cleaners or aggressive cleaning agents to clean the appliance.
Use a damp cloth to wipe down the operating screen and housing.
a
b