Cleaning - Vornado ALCHEMY Guide D'utilisation

CLEANING

10 English
GRILL REMOVAL
WARNING: To avoid risk of fire, electrical shock or injury to persons,
power off and unplug the air circulator before removing the grill.
TIP: To prevent scratching, gently cover the tip of a flat screwdriver with
a soft cloth.
1
Place flat screwdriver against the angled section of the grill support
tab and press outward to allow the grill wire to be released from
the support tab.
2
Repeat on second and third grill support tabs.
3
To reinstall, align and replace grill wire ends into the support tabs.
Use the flat screwdriver to flex wire ends back into the support tabs.
BLADE REMOVAL
WARNING: To avoid risk of fire, electrical shock or injury to persons,
power off and unplug the air circulator before removing the blade.
1
Remove the blade cap by unscrewing the blade cap clockwise.
2
Next, remove the fan blade by pulling the blade straight out
from the shaft.
3
To reinstall, push the blade all the way on the shaft until it bottoms
out. The blade can only go on the shaft one way. Do not use
a hammer as this could result in bearing damage. Replace the
blade cap.
BLADE CAP
English 11