Equaliser; Internet Settings; Connection Via A Network Cable; Network Wizard Configuration - TechniSat DIGITRADIO 143 CD Mode D'emploi

14.1 Equaliser

To adjust the sound of the DIGITRADIO 143 CD, the equaliser is available with the preset tuning of Middle, Classical, Rock, Pop
and Jazz.
> Via MENU > System settings > Equaliser you can access the equaliser settings.
Alternatively:
> Press the EQUALISER (EQ.) button on the remote control (19), to directly access the equaliser settings.
> Select the desired equaliser setting and press the OK button.
An * highlights the current Selection/Setting.

14.2 Internet settings

> Via MENU > System settings > Internet settings you can retrieve and configure the network settings.

14.2.1 Connection via a network cable

To configure the network connection via a network cable (LAN), you have the option of using the network wizard or configuring
manually.

14.2.1.1 Network wizard configuration

> Connect the LAN cable to the socket labelled LAN Input (22) on the DIGITRADIO.
> Select [Network wizard] to launch this.
The network wizard searches for all WLAN networks within range and subsequently shows them to you as well as the
[Cable] option.
> To use the network connection via a network cable (LAN) option, now select [Cable] and press the OK button.
After confirmation, the required settings, such as IP address, gateway, subnet mask, are automatically retrieved from your
router, provided the DHCP function is activated in the router.
EN
FR
IT
NL
PL
CZ
SK
43