Setting The Alarm Time; Switching Off The Alarm After Being Woken - TechniSat DIGITRADIO 143 CD Mode D'emploi

13.2.1 Setting the alarm time

The alarm function cannot be used until the correct time has been set. Depending on the set-up, this either occurs automatically
or needs to be set manually. The time can either be set manually or automatically using DAB USW or updated using the
Internet. See Section 14.3for further information.
> Select one of the alarm time memories (Alarm 1 or Alarm 2) and set the desired values point by point using the arrow
buttons p /q (22, 24) and OK (9) on the remote control.
Repeat Choose between repeat options Off (the alarm is switched off), Daily, Once,
Weekend (SAT-SUN), Working days (MON-FRI).
Time Set the time at which you wish to be woken.
If you have chosen Once as the repeat option, the date is also required.
Mode Select the source with which you wish to be woken. The following are available
Buzzer, Internet Radio, DAB, FM.
Programme Select whether playback should be from the source set beforehand, the Last listened to or one
of the Favourites memory settings.
Volume Select the volume with which you wish to be woken.
Save This saves the alarm settings.
The alarm settings are not accepted until selecting [Save].
The alarm is active provided you have set the alarm repeat to Daily, Once, Weekend, or Working days. The status bar
shows an alarm symbol with the corresponding number of the active alarm
for the set time.

13.2.2 Switching off the alarm after being woken

> Press the On/Standby (14) button or Alarm (17) on the remote control to switch off the alarm.
The display shows [Alarm off] and the alarm symbol is shown again if the alarm repeat is set to Daily, Weekend or
Working days.
. In the Off setting the alarm is not active
EN
FR
IT
NL
PL
CZ
SK
41