Hotpoint Ariston SL B18 AA0 Mode D'emploi page 20

Cleaning the filters (H)
model with dust bag
The Pure Clean Hepa
maximum protection against allergens and
maintains high air quality, as the air given back
by the appliance is entirely free from dust/
powder residues (filtering power > 99.95 %).
We advise you to clean the filter at least
every 4 months to restore its filtering
power. in any case we recommend replacing
the filter at least every year to ensure
maximum performance.
To clean the Pure Clean Hepa 13 filter (30):
1. Disassemble the air grill (31) using the
opening tab.
2. Remove the Pure Clean Hepa 13 filter by
releasing the opening tab.
3. Wash the filter under running water, taking
care that the jet of water is not too strong.
4. Hold it so that the water flows parallel to its
folds.
5. Let it dry at room temperature until all its
parts are thoroughly dry.
6. Replace the Pure Clean Hepa 13 filter,
paying attention to the position of the
notches.
7. Fit the air grill into its housing until it clicks
into place.
To clean the dust compartment filters (38):
8. Press the dust-compartment opening button
(13) to open the dust compartment lid (14).
9. Remove the Pure Clean dust bag (34), motor
filter grill (36) and motor filter (35) from the
motor filter grill.
10. Clean the motor filter by washing it under
running water, taking care that the jet of
water is not too strong. Then gently shake
water loose.
11. When cleaning the motor filter grill, remove
any dust/powder residues with a small brush.
If needed, use a damp soft cloth.
Make sure all its parts are thoroughly
dry before replacing them.
12. Fit the motor filter into the motor filter grill
again, taking care to position it gently into
the special notches.
13. Slide the motor filter grill assembly into the
13 filter ensures
special guides in the dust compartment.
14. Fit the Pure Clean dust bag using the special
dust bag support.
the appliance is equipped with a safety
device that
compartment lid from closing unless the dust
bag has been correctly installed. Do not force
the dust bag lid to close and make sure all the
parts are in the correct position to allow you to
close the lid.
15. Close the dust compartment lid until it clicks
into place.
Cleaning the dust container (i)
model without dust bag
For the routine cleaning of the dust container:
1. Press the dust-compartment opening button
(13) to open the dust compartment (14) and
remove the dust container (39).
2. Open the lid and empty the dust container.
3. Remove any residual dirt by washing the
dust container under running water.
4. Let it dry at room temperature until all its
parts are thoroughly dry.
5. Close the dust container lid until it clicks
into place and replace it into the dust
compartment.
6. Close the dust compartment lid until it clicks
into place.
Cleaning the filters (J)
model without dust bag
This model comprises two Pure Clean Hepa 13
filters. The Pure Clean Hepa 13 filter ensures
maximum protection against allergens and
high air quality, because the air given back by
the appliance is entirely free from dust/powder
residues (filtering power > 99.95 %).
We advise you to clean the filter at least
every 4 months to restore its filtering
power. in any case we recommend replacing the
filter at least every year to ensure maximum
performance.
To clean the Pure Clean Hepa 13 filter (30) in the
back:
1. Disassemble the air grill (31) using the
opening tab.
2. Remove the Pure Clean Hepa 13 filter by
en
prevents the dust-
eu
hotpoint.
19