CARE AND MAINTENANCE
To maintain optimum performance of this air purifier, please clean the unit including the filter
periodically.
Be sure to disconnect the power cord from the wall outlet before performing any maintenance.
BACK PANEL
Back Panel
NOTE
How to clean stubborn dirt
HEPA Filter
Tag
UNIT
(Pre-Filter)
Gently remove dust from the back panel,
using a vacuum cleaner attachment or simi-
lar tool.
CAUTION
Do not apply excessive pressure, when
scrubbing the back panel.
Back Panel
Gently remove dust from the HEPA Filter with a vacuum clean-
er attachment or similar tool.
CAUTION
• Do not WASH in water and DRY in the sun.
• Apply the maintenance only on the side with the tag.
Do not clean the opposite side; otherwise, the filter will be
damaged.
The filter is fragile, be careful not to apply too much force.
Wipe with a dry, soft cloth
For stubborn stains or dirt, use a soft cloth dampened with warm water.
CAUTION
• Do not use volatile fluids
Benzine, paint thinner, polishing powder, etc. , may damage the surface.
• Do not use detergents
Detergent ingredients may damage the unit.
E-8
1. Add a small amount of kitchen
detergent to water and soak for about
10 minutes.
2. Rinse off the kitchen detergent with
clean water.
3. Completely dry the filter in a well-
ventilated area.