Marmitek IR-RF7243 Mode D'emploi page 5

To Dim / Bright a Light:
1. Aim the remote at the front plate of the Mini Controller.
2. Press the mode key dedicated to HomeAutomation on your remote control.
3. Press the Module's Unit Code (1-9).
4. Press Volume UP/DOWN to bright/dim.
Note: If you use a Marmitek remote, use code 821 of the codebook. To control modules with
unit codes higher than 9, on most X10 remote control you can use the following keys.
• "10", press the 0 key and then on (Chan+), off (Chan-), bright (Vol+) or dim (Vol-)
• "11", press the A.B key and then on (Chan+), off (Chan-), bright (Vol+) or dim (Vol-)
• "12", press the
or Dim (Vol-)
• "13", press the
• "14", press the
• "15", press the
• "16", press the --/- key and then on (Chan+), off (Chan-), bright (Vol+) or dim (Vol-)
To Turn All Lights On:
1. Aim the remote at the front plate of the Mini Controller.
2. Press the mode key dedicated to HomeAutomation on your remote control.
3. Press the Power key of your remote control.
4. Control with your RF Remote
To Turn All Lights and Appliances Off:
1. Aim the remote at the front plate of the Mini Controller.
2. Press the mode key dedicated to HomeAutomation on your remote control.
3. Press the Mute key of your remote control.
To Turn On / Off a light or appliance:
On the front pannel of the remote control, press the ON or OFF key of the module's Unit
Code you wish to control (1 to 16 depending on the RF remote you are using).
For X10 IR/RF Universal Remote Control set to RF:
1. Press the mode key dedicated to HomeAutomation on your remote control.
2. Press the Module's Unit Code (1-16) on the numeric keypad of your remote control.
3. Press Channel UP/DOWN to turn it on/off on your remote control.
To Dim / Bright a Light:
Press the module's unit code (1 to 16 depending of the remote you are using) on the ON side
and then press DIM or BRIGHT.
MINI CONTROLLER
(or the record) key and then on (Chan+), off (Chan-), Bright (Vol+)
key and then on (Chan+), off (Chan-), bright (Vol+) or dim (Vol-)
key and then on (Chan+), off (Chan-), bright (Vol+) or dim (Vol-)
key and then on (Chan+), off (Chan-), bright (Vol+) or dim (Vol-)
5